No – I know this is not the same! But any opportunity to highlight the centenary of the formation of the UK’s own English Electric Co. seems OK.
The new Hitachi built Bi-Mode trains for Trans Pennine Express are a lot more sophisticated than the English Electric built electro-diesels for BR’s Southern Region in the 1960s, but the principle is the same – isn’t it? Taking power from an external electrified contact system and having on-board diesel engines when on non-electrified lines.
Here’s what we had in BR days:
In November 1964, an item appeared in the “Locomotive Journal” from ASLE&F, and in describing the Bournemouth Electrification project, this little snippet appeared:
Preston’s English Electric Co. had received an order for 43 of these locomotives, which was in essence part of the plan to elimiate steam traction, as well as following the Bournemouth electrification scheme.
They were numbered E6007-49 by BR, and designated Type JB to distinguish them from the six prototype Type JA locomotives, Nos. E600l-6, which later became class 71. The new English Electric/Vulcan Foundry built locos became classes 73/1 and 73/2. English Electric had supplied the power equipment for the six Type JA, BR built locos, which were constructed at Eastleigh Works, and entered service between February and December 1962.
The next batch, Type JB, were built at English Electric Co’s works at Newton-Le-Willows – originally the Vulcan Foundry – and delivered between October 1965 and January 1967. The diesel engines were also manufactured at Vulcan Foundry, with the electrical equipment produced at the Preston works.
Here’s what Hitachi have delivered:
The first of the “Nova 1” (class 802) trains arrived at Southampton on the 11th June 2018, and was successfully tested between Darlington and Doncaster in a 5-car set this month (July). Further testing is planned for the TPE route in the North of England and Scotland over the coming months. Also appearing in July 2018 are the new Hitachi Class 385 trains for the Glasgow Queen Street-Edinburgh Waverley route via Falkirk High. More class 385 trains will be phased in over the coming months, before being extended to other routes across the Central Belt.
The new Class 802s for TPE are essentially closely similar to the same type delivered by Hitachi to Great Western, and for TPE are fitted with MTU/Rolls-Royce Series 1600 MTU PowerPacks. The core of the PowerPack is the MTU 12V 1600 R80L, a 12-cylinder diesel engine, with low consumption/emissions, and meets the EU Stage IIIB emission legislation.
The trains, ordered as 19 x 5-car sets will be able to run in either five or ten carriage formation, capable of speeds of up to 140mph in electric mode and 125 mph using diesel engines.
One issue that has not been addressed for the UK so far as the bi-mode trains are concerned, is whether this is a stop-gap solution pending the restart of electrification projects across the Pennines.
Nevertheless the new rolling stock looks like a welcome improvement. This is a long way from the designs and requirements for rail operations in the 1960s, with fixed formation train sets – multiple units – and certainly more aerodynamic styling.
Let’s hope they can also be used on Northern Rail territory and lines in North West England.